The Melt and pour cutter will cut loaves or logs into bars of equal size each time, we can make the harp wire spacing, when
you order to cut the size of bar you want.
It can also be made to cut slabs into loaves or logs if you use tray
moulds, before cutting into bars.
The Melt and pour cutter will cut Melt and pour soaps, cold process, hot process and re made soap .
It will not cut soap with
fibrous additives such as thick stems or loofa.
Time taken to cut a log or loaf of soap into bars is 40 seconds including the time to load and unload the machine
Prices from £1,961
Shipping at cost
The Melt and pour cutter is a free standing machine needing only a plug pluged into the home or workshop electricity
supply 240 volt.
It is operated by using two hand levers one on the left hand side of the machine and the other on the right hand
side , this is to enure that the operators hands cannot be at risk. The machine has a perspex door which must be in the closed
position before machine can be started as an extra safety measure.
Roger Newman & Sons
Byrfon, Gwernogle, Carmarthenshire, Wales, SA32 7RY
Copyright©2022 Roger Newman & Sons
Roger Newman & Sons
Soapcraft
Designers & Makers
Of
Soap Cutters & Soap Moulds
Tel 44 01267202355