Roger Newman & Sons

Soapcraft

Designers & Makers
Home ] [ Hydraulic cutter ] Bar cutter ] Slab Cutter ] Soap Moulds ] Prices ] Links ]

 

 

Foot operated Hydraulic Cutter

This machine is designed to cut cold process soap for faster production runs,

The H1H hydraulic machine can cut large blocks of cold process soaps into bars with ease , this machine produces 500kg in excess of a 1000 lbs of force to cut the soap.

The machine is foot operated needing no electricity or power from an outside source, it is portable and can be moved around the workshop with ease

 

H1H down front min.jpg (20955 bytes) H1H soap cutting machine is made from high quality materials, it needs no electricity or compressor to operate. This makes it environmentally friendly and saves on running costs . 
45kg block of cold process soap ready to be cut soap block ready to be cut H1H min.jpg (13403 bytes) Slabs cut slabs 1st cut H1H min.jpg (17057 bytes) Final cut into bars H1H soap bars min.jpg (32325 bytes)
working  pictures courtesy of Visionary soaps

H1H Foot Operated Hydraulic Soap Cutting Machine
This soap cutter is a heavy machine designed to cut blocks of cold process soap up to 16” +16” + 18” inches,
or 40 cm +  40 cm + 46 cm   high.
Cutting slabs accurately on the first cut, then into logs on the second cut, the third cut being into bars.
The harps are fitted with stainless steel wires set to the spacing you order, each wire is individually tensioned by tensioning bolts. Removing four bolts changes the harps, with the harp you need.
 The machine is portable with its own wheels and is foot operated needing no electricity, the rising and falling cutting table has ample room for stacking the cut soap.
It is possible with a little skill to arrange on the final cut, to shape the bars into various shapes other than rectangles and squares.

The harps needed will be dependent on the size of soap you want to cut and moulds used.
The inside dimensions of the harps or frames are 17 inches by 17 inches this allows a soap block size of 16 inches by 16 inches to be cut , the depth of the cut is dependent on the size of mould, but has with the H1H a maximum depth of cut of 18 inches.

 

Roger Newman & Sons
Byrfon Gwernogle Carmarthenshire Wales SA32 7RY

Tel,     44  01267 202355


               mailto   roger@rockinglambs.co.uk

Home ] [ Hydraulic cutter ] Bar cutter ] Slab Cutter ] Soap Moulds ] Prices ] Links ]


Copyright©2009 Roger Newman & Sons